Electronic Access Control

Features / Benefits:

Remote Control

Hand held units, open your gate at the touch of a button.

GSM Dial

Open & close your gate with your mobile phone, Up to 200 authorized numbers can be programmed, No cost to user, Gate can be operated from anywhere in the world, No need for remote controls


Anti-vandalism stand alone keypad, Strong case made from anodised aluminium, Anti-tamper microswitch, Electronic circuit fully potted IP67 waterproof

Keypad / Intercom

Integrated digital keypad and hands-free intercom, Speak to visitors before granting access or authorised visitors use pin code, Weather resistant IP56 potted electronics, Slimline and stylish, Made from robust polycarbonate materials

Exit Loop

Recessed in the driveway inside the gate entrance. When vehicle rolls over it gate opens to allow vehicle exit


Electronic Safety Units for Automatic Gates

Features / Benefits:

Safety Loop

Used to prevent a gate from closing on a vehicle, Two loops can be wired to one detector, Loops are placed in front and behind the gate

Safety Sensors

Small size infrared safety photocells, Mounted on gate piers – externally and mounted on mini pillars internally. Gates stop closing when vehicle positioned between beams, Anti-vandalism casing, Range 10m, 90° orientable optic

Safety Edges

No touch safety device, Prevents direct contact with the moving gate leaf, Photo beams stop the gate leaf physically touching an obstacle preventing injury or damage

Surge Protection

Surge protection highly recommended for all gate operators, Protects the operator from power surges and lightning strikes


Civil & Electrical Works

What is Required? 

We carry out all civil and electrical works at the gate entrance for the automation system. This includes digging for the foundation boxes (if the system is sub terrain) and cutting a trench for ducting across the driveway from one pier to the other. We also supply and install any power or communications cabling at the entrance.

However if any further building work is needed at your site such as modifying piers or gates, or if the power is not in situe at the entrance we will be delighted to quote for any building work, welding or electrical work required.

Service Engineer


Power: A 220v cleanline circuit is required at the gate entrance. A 220v 13amp constant and dedicated supply is always recommended. The cable is always backed up at both ends with circuit breakers which will prevent injury in the event of the cable ever being damaged.

Data: Data cabling is required for hardwired intercom systems and override switches. External type CAT6 cable or POLY POLY communications cable is recommended.